Manufacturing process and misunderstanding analysis of disposable milk bottle

Manufacturing method and precautions of baby disposable milk bottle.

1. Disposable bottle one-step blowing bottle system has the advantages of small mechanical trauma, good air tightness of bottle cap, large air leakage flow, high transparency and beautiful appearance. Uneven wall thickness is a technical problem.

2. Two disposable baby bottles, the mechanical trace is more than one step, and the transparency is high. Foam bottle, bottle billet injection molding, the next process two times heating blow molding. The blank is stored in the hopper and warehouse to avoid the mechanical damage and bottle blank damage caused by the collision between the bottle blank and the bottle blank, resulting in poor sealing of the bottle cap and poor bottle mouth. The leakage current is greater than one step. Using the advantages of this technology to detect bottle blowing and ultrasonic thickness gauge, the bottle wall is uniform, the error is small, and the beer beverage is not easy to deform.

3. Characteristics of disposable milk bottles. First, pay attention to whether the lubricating fluid meets the use requirements. The disposable baby bottle can only be protected from chemical damage according to the specification of the lubricant. Otherwise, disposable bottles will be affected. During filling and packaging, the storage bottle leaks due to ultra thick acid-base chemical damage or chemical damage due to too high ultrasonic concentration. This phenomenon is particularly common in soda filled water.

4. Precautions for closure of disposable baby bottles for children. The sealing metal cap is a well-known metal coating material. If the metal aluminum cap is used for sealing, the sealing is tight and there is no doubt about the sealing performance. Pay special attention to the red claws on the iron cap and pressing the metal cap. The metal cover bounces back from the metal material due to mechanical rebound. If there is a rebound position, the sealing effect of the packaging is of course very poor, but due to the external force, the light, heat and vibration of the packaging bottle shrink or expand under the external force, which will seal the bottle cap and the bottle cap, and the leachate will cause air leakage.

Analysis of consumers' misunderstanding of disposable baby bottles.

1. The disposable baby bottle has no taste, and the more transparent it is, the better the quality of the bottle is.

The milk bottle made of PP raw material will have a little plastic smell. It can be eliminated by disinfecting in boiling water for 3-5 minutes before use. Usually no taste. The time should not be too long to avoid sticking to the bottom of the pot and deformation; The bottle made of PP material has the feeling of fog. If there is too much air permeability on the market, pay attention to the chemical composition that may contain transparent agent.

2. When the baby sucks, the pacifier will sag, which is a defect and has a quality problem.

Different manufacturers have different design concepts of pacifiers. In order to prevent the baby from being choked, the pacifier has a forced stop function. Generally, the pacifier can be restored or the tooth cover can be loosened as long as the baby breathes back.